Step-by-Step Guide to Making a Mold for Small Plastic Parts: What You Need to Know
A: Alright, so you want to make a mold for small plastic parts?
B: Yes, I do.
A: Great! Let’s get started. First, you’ll need to gather the materials you’ll need. You’ll need a mold box, a two-part silicone rubber, a release agent, a measuring cup, a mixing container, a stirring stick, and a heat gun.
B: Got it.
A: Next, you’ll need to prepare the mold box. Make sure it’s clean and dry, and then spray the release agent inside the box. This will help the silicone rubber release from the box when the mold is finished.
B: Okay.
A: Now, you’ll need to measure out the two-part silicone rubber. Make sure you measure out the correct amount for the size of the mold you’re making.
B: Got it.
A: Once you’ve measured out the silicone rubber, mix it together in the mixing container. Make sure you mix it thoroughly, as this will ensure a good quality mold.
| Material selection | size |
| ABS/PET/PEEK/ETC. | customization |
B: Okay.
A: Now, pour the mixed silicone rubber into the mold box. Make sure you fill it up to the top, as this will ensure a good quality mold.
B: Got it.
A: Finally, you’ll need to use the heat gun to cure the silicone rubber. Make sure you heat it up to the correct temperature for the type of silicone rubber you’re using.
B: Got it.
A: That’s it! Once the silicone rubber has cured, you can remove the mold from the box and you’ll have a perfect mold for small plastic parts.
